Auto Lifting System 20 25 30m High Mast Lighting

Product Introduction

◎Advantages of the automatic lifting system: Through functions such as one-key lifting, emergency response, and load monitoring, the system achieves comprehensive improvements in safety performance, maintenance efficiency, operating costs, intelligent control, and structural reliability.

◎Light pole anti-corrosion technology: Adopting Q355B steel base material + four-layer protection (hot-dip galvanizing, powder coating, special environment adaptation, internal moisture-proof), which significantly improves anti-corrosion ability.

◎IP65 protection level: IP65 achieves complete dustproof and low-pressure water column spray protection. Compared with IP54, it has significant advantages in dustproof, waterproof, and service life, and is suitable for extreme environments.

Automatic Lifting System

Improved Safety Performance

◎Zero risk of aerial work: Traditional high mast light maintenance requires manual climbing to a height of 30 meters, while this system realizes one-key lifting of the lamp panel through a remote control or control cabinet. Maintenance personnel always operate on the ground, completely eliminating the risk of falling.

◎Enhanced emergency response capability: In case of extreme weather such as typhoons and thunderstorms, the lamp panel can be lowered to a safe height (≤5 meters) within 15 minutes to avoid damage to the lamp due to strong wind impact.

◎Load monitoring and early warning: Built-in pressure sensors monitor the load of the lifting mechanism in real-time. When the load exceeds 90% of the rated value, it automatically stops and alarms to prevent structural failure caused by overload.

Improved Maintenance Efficiency

◎Working hours reduced by 85%: The traditional method of replacing lamps requires 4 people for 8 hours, while this system only needs 2 people to complete the lamp panel lifting and lamp replacement within 2 hours.

◎Flexible maintenance windows: Supports all-weather lifting operations without waiting for weather conditions or applying for aerial work permits, reducing equipment downtime by 70%.

◎Tool integration design: The lamp panel is equipped with standardized installation interfaces, which can quickly replace different types of lamps such as LED and metal halide lamps, reducing the number of tool types by 60%.

Empowered by Intelligent Control Technology

◎Remote monitoring system: Real-time transmission of lifting status, fault codes, maintenance records and other data through IoT modules, supporting remote control via mobile APP/PC terminal.

◎Adaptive lifting strategy: Automatically adjust the lifting time according to the ambient light intensity, for example, automatically rise 1 hour before sunrise and automatically fall 0.5 hours after sunset.

◎Fault self-diagnosis function: Built-in more than 200 fault models, which can accurately locate problems in electrical, mechanical, and hydraulic systems, with a maintenance guidance accuracy of 95%.

 

Enhanced Structural Reliability

◎Wind resistance design: The light pole is designed according to a category 12 typhoon (wind speed 32.7m/s). When the lamp panel is lifted to any height, the overall structural deformation is ≤H/300 (H is the height of the light pole).

◎Seismic performance: Meets the requirements of 8-degree seismic intensity, and the probability of jamming of the lifting mechanism under seismic waves is ≤0.01%.

◎Anti-collision protection: A rubber buffer device is set at the bottom of the light pole, which can absorb 80% of the impact energy of a 5-ton vehicle hitting at a speed of 10km/h.

Light Pole Material Anti-corrosion Technology

Base Material Selection Standards

Adopt Q355B low-alloy high-strength structural steel with a yield strength ≥355MPa and elongation ≥22%, which has 40% better corrosion fatigue resistance than ordinary Q235 steel.

The surface roughness of the steel is controlled at Ra6.3-12.5μm to enhance coating adhesion.

Hot-dip Galvanizing Process

◎The galvanized layer thickness is ≥85μm (in line with ISO 1461 standard), 30% thicker than conventional galvanized layers, and the neutral salt spray test (NSS) corrosion resistance time reaches more than 2000 hours.

◎Passivation treatment is carried out after galvanizing to form a dense oxide film, further inhibiting the formation of red rust.

Powder Coating System

◎Adopt epoxy-polyester hybrid powder coating with a thickness of 80-120μm, hardness ≥2H, and impact resistance ≥50kg·cm.

◎The coating adhesion reaches ISO 2409 standard level 0, and can withstand temperature changes from -40℃ to +80℃ without cracking.

Product Advantages

◎Automatic lifting

◎Light pole anti-corrosion

◎IP65 protection

◎Hot-dip galvanizing

◎Dustproof and waterproof

About Us

Hot Tags: auto lifting system 20 25 30m high mast lighting, China auto lifting system 20 25 30m high mast lighting manufacturers, suppliers, factory, 400w Led High Mast Light, Flood Light Mast, High Mast Pole with Led Flood Lighting System, High Mast Solar Street Light, Solar High Mast Lighting System, Solar High Mast Pole