600 Watt Solar Street Light

Product Introduction

◎IP65 protection rating: The 600W solar street light adopts the IP65 protection standard, achieving complete dustproof and water jet resistance. Compared with IP54, it significantly improves equipment durability, reduces the full-life-cycle maintenance cost, and is suitable for extreme environments such as high dust and heavy rain.

◎Self-cleaning function: Through the bionic superhydrophobic coating and in-situ cleaning system, the street light can actively remove pollutants such as dust and oil stains, reducing reliance on manual cleaning and improving power generation efficiency. In scenarios such as deserts and industrial zones, the power generation increase can reach up to 35%.

◎Adaptation to installation heights in multiple scenarios: It supports flexible adjustment of heights from 3 to 12 meters. Combined with the adjustable-angle lamp head and intelligent light control technology, it meets the differentiated needs of main roads, mountain bends, bridge tunnels and other scenarios, enhancing lighting uniformity and safety.

IP65 Protection Rating

1.IP65 Standards

◎Dustproof Level 6: Completely prevents dust from entering the equipment. Even in environments with extremely high dust concentrations such as deserts and construction sites, the photovoltaic controller, lithium battery pack, and LED driver module inside the street light can remain clean, avoiding the risk of heat dissipation failure or short circuits caused by dust accumulation.

◎Waterproof Level 5: Can withstand low-pressure water jets from any direction (jet pressure 30kPa, distance 3 meters, duration 3 minutes). This feature enables it to resist heavy rain, typhoons, sprinkler flushing, and other scenarios, ensuring stable operation of the street light in humid environments.

2.IP65 vs IP54

Self-Cleaning Function

1.Bionic Superhydrophobic Coating: Industrial Application of the Lotus Leaf Effect

Drawing on the micro-nano structure of lotus leaf surfaces, the surface of the street light's photovoltaic panel is coated with a titanium dioxide (TiO₂)-based superhydrophobic coating, resulting in a water contact angle of >150° and forming a self-cleaning effect where "water droplets roll off, carrying dust away". Experimental data shows that after coating, the light transmittance of the photovoltaic panel increases from 82% to 91%, and the daily power generation rises by 12%.

2.In-Situ Cleaning System: Cross-Border Integration of Industrial Pipeline Cleaning Technology

For stubborn contaminants such as heavy oil stains and bird droppings, some high-end models integrate a Clean-in-Place (CIP) module. It sprays cleaning fluid at 0.5MPa pressure through a built-in water pump, combined with a 360° rotating nozzle to achieve dead-angle-free cleaning. In a chemical plant project, this system extended the photovoltaic panel cleaning cycle from once a month to once a quarter, saving 200 tons of water annually.

3."Scenario-Based Adaptation" of Self-Cleaning Technology

Different environments have varying demands for self-cleaning functions. The 600W solar street light achieves precise matching through modular design:

◎Desert areas: Prioritize the superhydrophobic coating, utilizing dew condensed at low night temperatures for natural cleaning;

◎Industrial zones: Adopt a combined solution of coating + CIP system to cope with the dual challenges of oil stains and dust;

◎Coastal areas: Add anti-salt spray coating to prevent coating failure caused by seawater corrosion.

Product Advantages

◎600W solar street light

◎IP65 protection rating

◎Self-cleaning technology

◎Installation height adaptation

◎Smart city lighting

◎Outdoor lighting solutions

About Us

Hot Tags: 600 watt solar street light, China 600 watt solar street light manufacturers, suppliers, factory, 12v solar panel 300w, integrated solar light, Outdoor Solar Up Lights, red solar lights, Self cleaning All in One Solar Street Light, solar lighting