Product Introduction

Through the collaborative innovation of the IP65 protection level, all-stainless steel fasteners, and high-density LED lamp beads, the Outdoor Solar LED Street Light has redefined the reliability standard of outdoor lighting.
Its fully sealed structure can withstand extreme weather conditions. The stainless steel material ensures mechanical strength and corrosion resistance, while the high-density LED array achieves high energy efficiency and an extremely long lifespan. Whether it is in the tropical rainforest, desert highways, or coastal industrial areas, the Outdoor Solar LED Street Light can provide stable and uniform lighting at an extremely low maintenance cost, offering crucial support for smart cities and green infrastructure construction.
With the continuous progress of LED technology and material science, this type of product is bound to dominate the global outdoor lighting market.
IP65 vs IP54
The Outdoor Solar LED Street Light is specifically designed for the complex and changeable outdoor environment, and it needs to deal with multiple challenges such as rainwater erosion, sand and dust intrusion, extreme temperature differences, and mechanical impacts.
Its protection level reaches the IP65 standard, which has significant technical advantages compared with IP54, providing a reliable guarantee for the long-term stable operation of the lamps.
Resistance to Torrential Rain and Floods
In tropical monsoon climate regions (such as Southeast Asia and South Asia), the daily rainfall can reach more than 300mm. The IP65 rating ensures that the lamps have no risk of short circuits during continuous torrential rain.

Protection against Sandstorms
In desert or arid regions (such as the Middle East and Africa), the IP65 rating can prevent PM10-level sand and dust from intruding, avoiding heat dissipation failure caused by dust accumulation.
Low Maintenance Cost
Compared with IP54 lamps that require the replacement of the sealing ring every 2 years, the sealing structure of IP65 lamps has a service life extended to more than 8 years, reducing the costs of manual inspection and spare parts.
All-stainless Steel Fasteners: A Dual Guarantee
The mechanical structure of the the Outdoor Solar LED Street Light adopts all-stainless steel (304/316L) fasteners. From the lamp post installation bolts to the internal circuit board fixing screws, long-term reliability in extreme environments is achieved through material selection and process optimization.
1. Technical advantages of stainless steel materials
Corrosion Resistance
304 Stainless Steel: Containing 18% chromium and 8% nickel, it is suitable for general outdoor environments (such as coastal areas with a humidity ≤ 80%). Its salt spray corrosion resistance can reach 500 hours (ASTM B117 standard).
316L Stainless Steel: With the addition of 2%-3% molybdenum elements, its pitting corrosion resistance is increased by 3 times in environments with a high chloride ion concentration (such as islands and chemical plant areas), and its service life exceeds 20 years.
High Strength and Fatigue Resistance
The yield strength ≥ 205MPa, and the tensile strength ≥ 520MPa. It can withstand the mechanical stress generated by an earthquake of magnitude 8 or a typhoon of magnitude 12 (wind speed ≥ 32.7m/s).
Through cold heading forming and surface nitriding treatment, the hardness is increased to above HV350, avoiding the loosening of screws caused by long-term vibration.

2. Engineering Details of Fastener Design
Anti-loosening Structure
The lamp post installation bolts adopt a combination of double nuts and spring washers. The clearance caused by thermal expansion and contraction is eliminated through the control of the pre-tightening force (the torque value is 15-20N·m).
The photovoltaic panel bracket bolts are embedded with nylon self-locking washers, maintaining the locking force within the temperature change range from -40°C to 85°C.
Conductive Shielding Design
The grounding bolts adopt the brass nickel-plating process, with a resistivity ≤ 0.017Ω·mm²/m, ensuring the rapid release of lightning strike current (20kA/8/20μs).
A conductive rubber pad is added between the circuit board fixing screws and the casing to shield EMI interference and ensure the stable operation of the intelligent control module.

Product Advantages
√ No need to install the battery
√ No need to install solar panels
√ No need to do cumbersome construction again
√ Easy to install in minutes
√ Color and power can be customized

About Us
Address: Guoji Industrial Park, Songqiao Town, Gaoyou City, Jiangsu Province, China ;
Tel/WhatsApp: +86 18118266199;
Mail: hjy@jcledzm.cn
Hot Tags: outdoor solar led street light, China outdoor solar led street light manufacturers, suppliers, factory, solar powered security lights with motion sensor, solar panel flood light, outdoor solar lights for yard, best outdoor solar lights for pathway, Solar Street Light with Wifi Camera, solar deck post lights 4x4













