800w Solar Street Light
video
800w Solar Street Light

800w Solar Street Light

1.High-power LED modules
2.Precision optical design
3.Dedicated lithium batteries: long lifespan, high safety, and wide temperature range
4.Color rendering index greater than 85
5.Advanced microcomputer controller
Send Inquiry
Description

Product Introduction

  • The 800W solar street light employs high-power LED modules and precision optical design to thoroughly address the issues of low-power street lights, such as "insufficient brightness, small coverage, and inability to handle complex scenarios".
  • Equipped with industrial-grade lithium iron phosphate batteries, intelligent management through the BMS system, and high-protection design, it solves the pain points of traditional lead-acid batteries, including "short lifespan, poor safety, and low-temperature failure".
  • The 800W solar street light uses high-color-rendering LED chips and spectral optimization technology, with a color rendering index (Ra) ≥85 (a customizable Ra≥90 version is available), significantly superior to traditional high-pressure sodium lamps (Ra≤25). This provides a "daylight-like" lighting environment for nighttime driving and pedestrians.
  • Through the integration of a microcomputer controller and multi-sensor linkage, it enables demand-based lighting, remote monitoring, and fault early warning, reducing operation and maintenance costs.

 

1

 

High Power vs. Low Power

Core Parameter Comparison Between High Power and Low Power

Indicator

800W Solar Street Light

Low-Power Street Light

Advantages of High Power

Light Source Power

800W (expandable to 1,000W)

50W–300W

Brightness increased by 3–16 times, single-lamp coverage area expanded by 5–10 times, reducing lamp post density and installation costs.

Luminous Flux

≥120,000lm (800W)

≤45,000lm (300W)

Meets the requirements of Class I roads in Urban Road Lighting Design Standard (CJJ 45-2015), with illuminance increased by over 200%.

Irradiation Range

Diameter 80–120m (beam angle 120°×60°)

Diameter 30–50m (beam angle 120°×60°)

Single-lamp coverage area of 5,000–11,000 m², suitable for 8-lane main roads, large squares, and ports.

Color Rendering Index (Ra)

≥85 (customizable Ra≥90 version available)

Ra≤70 (traditional high-pressure sodium lamp)

Simulates natural light, enhancing night driving and pedestrian safety while reducing traffic accident rates by over 30%.

Color Temperature

4000K–6500K (adjustable)

Fixed color temperature (e.g., 2700K warm light)

Supports switching between cool white (5700K) and neutral light (4000K) to adapt to different scenarios.

Efficacy Ratio

≥180lm/W (industry average: 120–150lm/W)

≤150lm/W

Brightness increased by 20%–50% at the same power, reducing requirements for solar panels and battery capacity, and lowering system costs.

 

Technical Breakthroughs of High-Power Street Lights

  • Multi-Module Parallel Technology

Uses 16–32 industrial-grade high-power LED chips (e.g., Lumileds Luxeon TX, Cree XP-L) in parallel, with single-chip luminous efficacy ≥190lm/W. Nanoscale optical lenses improve light spot uniformity to over 90%.

  • Dynamic Spot Compensation

Supports ±20° pitch angle adjustment and 15° left-right rotation, adapting to sloped roads and irregular terrains to avoid light pollution and dark areas.

  • Intelligent Zoning Dimming

Divides the lamp panel into 8–16 independent zones, achieving demand-based lighting via multi-channel driver chips (e.g., reducing brightness to 50% when no vehicles are detected), enhancing energy efficiency by 40%.

 

Dedicated Lithium Batterie

Core Parameters of Dedicated Lithium Batteries

Indicator

Parameter

Technical Advantages

Battery Type

Lithium Iron Phosphate (LiFePO₄)

Cycle life >6,000 times (100%DOD), 3 times higher than lead-acid batteries, supporting 10 years of maintenance-free operation.

Capacity

400Ah–600Ah (customizable)

Supports 3–7 days of backup power for rainy days, meeting extreme weather requirements.

Charge/Discharge Efficiency

≥95% (supports 0.5C–2C dynamic charging/discharging)

20% higher efficiency than lead-acid batteries, reducing charging time and energy loss.

Operating Temperature

-30℃ to +70℃ (capacity decay <10% across full temperature range)

Adaptable to extreme cold (e.g., Siberia, Russia) and high-temperature (e.g., Middle Eastern deserts) environments, with 50% improved low-temperature discharge efficiency.

Safety Performance

Certified by UL 1642/IEC 62133

Built-in five-layer protection against overcharge, over-discharge, over-current, short circuit, and thermal runaway; no fire or explosion during puncture/extrusion/high-temperature tests.

Protection Rating

IP67 (independently sealed battery compartment)

Dustproof and waterproof, supports short-term immersion (1m water depth, 30 minutes), resistant to salt spray corrosion for >1,000 hours.

 

BMS Intelligent Management System

  • Balanced Charging Technology

Active balancing circuits control the voltage difference between single cells within ±10mV, avoiding capacity degradation caused by the "short-board effect."

  • Precise SOC Estimation

Utilizes the Kalman filter algorithm, combining multi-dimensional data such as voltage, current, and temperature, with an SOC estimation error <3%.

  • Remote Monitoring

Uploads battery status (voltage, current, temperature, remaining capacity) via 4G/LoRa modules, supporting remote fault diagnosis and OTA upgrades.

 

Color Rendering Index > 85

Technical Analysis of Color Rendering

  • High-Color-Rendering LED Chips

The full spectrum LED chip is selected to achieve Ra≥85 through the optimization of phosphor ratio, and cover more than 95% of the visible light band (380nm-780nm).

  • Spectral Matching

Color rendering indices R9 (saturated red light) ≥50 and R12 (saturated blue light) ≥70 ensure true-to-life color reproduction of objects and reduce visual fatigue.

  • Visual Comfort

Color temperature of 4000K–5000K (neutral white light), flicker-free (flicker depth <1%), compliant with IEEE 1789-2015 standards, reducing glare and blue light hazards.

 

2

 

Application Value of Improved Color Rendering

  • Traffic Safety

High-color-rendering lighting enhances drivers' ability to identify pedestrians, obstacles, and traffic signs, reducing traffic accident rates by over 30%.

  • Commercial Value

Suitable for commercial streets, parking lots, and other scenarios, enhancing product display effects and customer shopping experiences.

  • Security Monitoring

Combined with high brightness, high color rendering supports 24-hour high-definition monitoring and reduces surveillance blind spots.

 

Product Advantages

The 800W solar street light achieves ultra-wide coverage, long-lasting battery life, and excellent visual experience through high-power light sources, high-performance energy storage systems, and high-color-rendering lighting technologies, significantly outperforming low-power street lights.

  • High-Power Lighting
  • Dedicated Lithium Batteries
  • High Color Rendering
  • Intelligent Control
  • Scenario-Based Adaptation

 

3

 

About Us

Address: Guoji Industrial Park, Songqiao Town, Gaoyou City, Jiangsu Province, China ;

Tel/WhatsApp: +86 18118266199;

Mail: hjy@jcledzm.cn

Hot Tags: 800w solar street light, China 800w solar street light manufacturers, suppliers, factory, Solar Led Light 100w, led remote control, led power, Led Street Light with Day Night Sensor, Led Lamp Street Light, pixel led light

Send Inquiry

(0/10)

clearall