Home>Products> LED Lighting > LED Street Light

Led Ip66 Street Light

● IP66 Protection Rating
● Full anti-corrosion design, easily coping with salt spray, chemical erosion, and high-humidity environments
● Electric shock prevention safety architecture, full protection from structural design to electrical protection

Send Inquiry

Description

Product Introduction

The LED IP66 Street Light is a high-protection-grade road lighting device specially designed for extreme outdoor environments, suitable for scenarios such as coastal ports, chemical parks, bridges and tunnels, storm-prone areas, and industrial zones.

IP66 Protection Rating

Waterproof Performance: 30% improved over IP65, capable of withstanding powerful water jets (100L/min), suitable for extreme water pressure environments.

Impact Resistance: Certified to IK08, able to withstand 10J energy impacts, adapting to complex installation environments.

Full Anti-Corrosion Design

Material Selection: ADC12 aluminum alloy + 316L stainless steel + tempered glass, with salt spray corrosion resistance ≥1000 hours.

Anti-Corrosion Process: Three-layer coating protection (primer + intermediate paint + topcoat), extending service life 3 times compared to traditional steel.

Electric Shock Prevention Safety Architecture

Double Insulation: Basic insulation + additional insulation, with withstand voltage ≥4000V and leakage current ≤0.75mA.

Safety Interlock: Automatic power-off when the cabin door is opened, preventing unauthorized access to live components.

product-497-67

IP66 Protection Rating

Definition of IP66 Protection Rating

IP6X (Dustproof): Completely prevents foreign objects and dust intrusion. Tested in a negative pressure dust chamber per IEC 60529 standard, with no visible dust accumulation inside.
IPX6 (Waterproof): Withstands powerful water jets (water flow: 100L/min, water pressure: 6000L/h, test duration: 3 minutes), unaffected by water spraying from any direction. Suitable for seaside surges, heavy rain, high-pressure cleaning, and similar scenarios.

Comparison Between IP66 and IP65

Protection Rating	Dust Resistance	Water Resistance	Application Scenarios
IP65	Full dustproof	Protection against water spray (12.5L/min flow, 750L/h pressure) for general rain	Regular outdoor roads, urban squares, ordinary industrial areas
IP66	Full dustproof	Withstands powerful water jets (100L/min flow, 6000L/h pressure) for extreme water pressure	Coastal ports, chemical parks, bridges/tunnels, storm-prone areas, high-pressure cleaning zones

Technical Advantages of IP66

Enhanced Water Tightness: Triple-sealing technology (silicone sealing ring + ultrasonic welding + waterproof breathable valve) ensures the luminaire operates normally after immersion in 1m water for 30 minutes.
Impact Resistance: Passed IK08 protection rating (10J energy impact), withstanding impacts from a 5kg object falling freely from 40cm height, suitable for complex installation environments.

Full Anti-Corrosion Design

Material Selection

Lamp Body Material: ADC12 high-pressure cast aluminum alloy, surface treated with anodizing + three-proof paint spraying, salt spray corrosion resistance ≥1000 hours (ISO 9227 standard), lifespan 3 times longer than traditional steel.

Fasteners: 316L stainless steel bolts, chloride ion corrosion resistance 50% higher than 304 stainless steel, suitable for high-salt environments like seaside and salt lakes.

Lens Material: 3mm tempered glass, light transmittance ≥95%, chemical corrosion resistance (pH 2–12), lifespan 4 times longer than PC lenses.

Anti-Corrosion Processes

Multi-Layer Protective Coatings

Primer Layer: Epoxy zinc-rich primer (thickness ≥80μm) providing cathodic protection.

Intermediate Layer: Polyurethane anti-corrosion paint (thickness ≥120μm) blocking chloride ion penetration.

Topcoat Layer: Fluorocarbon paint (thickness ≥40μm) resistant to UV aging (QUV accelerated aging test ≥5000 hours).

Sealing Design

Cable Inlet: M20 waterproof connector + heat-shrinkable sleeve, IP68 waterproof rating, withstands 1MPa water pressure.

Breather Valve: PTFE waterproof breathable valve balances internal/external pressure to prevent condensate accumulation.

product-1194-790

Electric Shock Prevention Safety Architecture

Electrical Safety Standards

Insulation Class: Complies with Class I requirements, housing passes 1500V withstand voltage test (IEC 60598-1), leakage current ≤0.75mA (220V/50Hz).

Grounding Protection: Built-in yellow-green grounding wire (cross-sectional area ≥2.5mm², grounding resistance ≤0.1Ω), meeting GB 7000.1-2015 requirements.

Double Insulation

Basic Insulation: 0.4mm-thick epoxy resin board isolates LED driver power supply from the housing, withstand voltage ≥4000V.

Additional Insulation: Ceramic capacitor + varistor added to power output to suppress transient overvoltage.

Safety Certifications: Passed CE, RoHS, UL 1598, EN 60598-2-3 certifications, compliant with EU Low Voltage Directive (LVD) and U.S. National Electrical Code (NEC).