Product Introduction
- Large-Area Illumination and High Brightness
Multi-Chip Integrated COB Packaging: Luminous flux ≥30,000lm, luminous efficacy ≥180lm/W, 60% more energy-efficient than traditional lighting fixtures.
High-Transmittance Tempered Glass Lens: Beam angle: 120°×60°, coverage radius ≥30m, uniformity U0≥0.45.
- High-Penetration Lighting
Nanoscale Anti-Reflective Coating: Improves transmittance by 30% in fog, rain, or snow, extending effective illumination distance to 50m.
Dynamic Spectrum Compensation Technology: Optimizes long-wavelength light proportion for enhanced adaptability to complex environments.
- Wide Beam Angle and Light Distribution Control
Free-Form Surface Lens Design: Light loss ≤5%, compliant with Type III/V road lighting standards.
Multi-Module Splicing Technology: Expandable coverage up to 1,000㎡, adaptable to complex terrains and installation requirements.

Large-Area Illumination and High-Brightness Design
● Multi-Chip Integrated COB Packaging Technology
Chip Configuration: Uses CREE XHP70.2 or Lumileds LUXEON 5050 series LED chips with single-chip power ≥10W. Integrated quantity: 24–48 chips, total power: 300–600W, luminous flux ≥30,000lm (600W model).
Optical Efficiency: Zero-spacing arrangement of chips via COB packaging achieves luminous efficacy ≥180lm/W, a 20% improvement over traditional SMD packaging.
● High-Transmittance Tempered Glass Lens
Lens Material: 3mm-thick tempered glass with transmittance ≥95% (380–780nm) and impact resistance ≥8J (IK10 standard).
● Beam Angle Design
Primary beam angle: 120° (horizontal) × 60° (vertical), coverage radius ≥30m (at 8m installation height).
Secondary beam angle: Edge light compensation via batwing lens, uniformity U0≥0.45, glare index (TI) ≤15.
● Intelligent Brightness Adjustment System
PWM dimming technology: Supports 0–100% stepless dimming at ≥1kHz frequency, flicker depth ≤0.1% (flicker-free).
Ambient light sensing: Built-in photosensitive sensor auto-adjusts brightness based on natural light intensity, enhancing energy efficiency by 30%.

High-Penetration Lighting Technology
- Nanoscale Anti-Reflective Coating (ARC)
Coating Process: Magnetron sputtering deposits multi-layer SiO₂/TiO₂ composite films on the lens surface, thickness ≤200nm.
Penetration Enhancement: Improves transmittance by 30% in low-visibility environments (fog, rain, snow, dust), extending effective illumination distance to 50m (600W model).
- Color Temperature and Color Rendering Optimization
Color Temperature Range: 3000K (warm white)–6500K (cool white), supports dynamic color temperature adjustment (CCT 2700K–6500K).
Color Rendering Index (Ra): ≥80 (industrial scenarios); optional high-color-rendering versions with Ra≥95 (stadiums, commercial areas).
- Dynamic Spectrum Compensation Technology
Fog Compensation: Algorithm enhances the proportion of long-wavelength (red/yellow) light for improved penetration.
Rain Compensation: Optimizes beam angle and brightness distribution to reduce ground reflection interference.

Wide Beam Angle and Light Distribution Control
- Free-Form Surface Lens Design
Lens Structure: Aspherical free-form surface lenses enable precise beam angle control with light loss ≤5%.
Light Distribution Curve: Complies with Type III (medium-distance) or Type V (full-circle) road lighting standards, illuminance uniformity ≥0.4.
- Multi-Module Splicing Technology
Modular Design: Supports splicing of 2–4 lighting modules, expandable coverage up to 1000㎡ (at 10m installation height).
Adjustable Angle Bracket: Supports ±15° vertical and horizontal angle adjustment, adapting to complex terrains and installation requirements.
- Intelligent Light Distribution Algorithm
Zone Dimming: Enhances brightness in key areas (e.g., intersections) via external sensors or cameras.
Dynamic Shielding: Automatically dims non-essential areas during low-traffic nighttime periods, improving energy efficiency by 40%.
Product Advantages
- Large-area illumination
- High brightness
- High penetration
- Wide beam angle
- Intelligent control

About Us
|
Address: |
Guoji Industrial Park, Songqiao Town, Gaoyou City, Jiangsu Province, China ; |
|
Tel/WhatsApp: |
+86 18118266199; |
|
Mail: |
hjy@jcledzm.cn |
Hot Tags: led flood street light, China led flood street light manufacturers, suppliers, factory, All in Two Solar Street Light, Double Arm LED Lights, Led Lamp Street Light, Led Pedestrian Light, Small Street Lights, Solar Led Street Light All in One













