Product Introduction
- Integrated Monitoring
High-Definition Imaging: 4K resolution + 10x optical zoom, covering a monitoring range with a 50m radius.
AI Intelligent Analysis: Facial recognition, license plate recognition, abnormal behavior detection, supporting local storage and cloud synchronization.
Data Security: AES-256 encrypted transmission to prevent information leakage.
- Electric Shock Prevention Safety
Three-Level Isolation Protection: Complete electrical isolation of photovoltaic systems, LED circuits, and monitoring cameras.
Electric Shock Prevention Structure: Fully sealed lamp body + V0-grade flame-retardant materials + automatic leakage cutoff technology, zero electric shock risk.
Stringent Testing: Passed 5kV withstand voltage test, 1000-hour salt spray corrosion test, and Category 17 typhoon wind resistance test.
- Monocrystalline Silicon Photovoltaic System
High-Efficiency Cells: N-type TOPCon technology, conversion efficiency ≥24.5%, low-light performance improved by 20%.
Intelligent Energy Storage: Lithium iron phosphate battery pack, cycle life ≥8000 times, supporting 7 consecutive rainy days of power supply.
Energy Management: MPPT controller efficiency ≥99.5%, intelligent scheduling algorithm optimizes power supply mode.
- Multi-Scenario Adaptability
Modular Design: Photovoltaic modules, battery packs, and monitoring functions are expandable to adapt to different needs.
Environmental Adaptability: Wide-temperature operation from -40°C to +85°C, salt spray corrosion resistance, lightning protection design.
Intelligent Control: Supports ZigBee/LoRaWAN/NB-IoT, compatible with smart city management platforms.

Integrated Monitoring Design
● Camera Configuration and Optical Design
Sensor Type: Equipped with 1/1.8-inch CMOS image sensor, 4K resolution (3840×2160), 30fps frame rate, supporting H.265/H.264 dual coding.
● AI Analysis Functions
Facial Recognition: Supports 1:N matching (database capacity ≥100,000), recognition accuracy ≥99.5%.
License Plate Recognition: Supports Chinese and English license plate recognition (recognition rate ≥98%), nighttime recognition rate ≥95%.
Abnormal Behavior Detection: Built-in deep learning algorithms to identify behaviors such as fence climbing, illegal parking, and crowd gathering.

● Monitoring System Reliability
Protection Rating: Camera module IP65 protection, lens with nano-hydrophobic coating for dustproof, waterproof, and anti-fogging.
Heat Dissipation Design: Camera with built-in heat pipe + graphene radiator, internal temperature ≤55°C at ambient temperature 60°C.
Data Security: Supports AES-256 encrypted transmission, local storage (1TB SSD).
Electric Shock Prevention Safety System
- Three-Level Isolation Protection Design
Primary Isolation: Complete physical isolation between photovoltaic system and utility grid, photovoltaic input with dedicated lightning arrester (SPD), withstands 10kV lightning strikes.
Secondary Isolation: LED drive circuit uses isolated DC-DC converter, input-output electrical clearance ≥8mm, creepage distance ≥12mm.
Tertiary Isolation: Monitoring camera and LED luminaire share independent grounding system, grounding resistance ≤4Ω, leakage current ≤0.5mA (national standard ≤5mA).
- Innovative Electric Shock Prevention Structure
Fully Sealed Lamp Body Design: Double O-ring sealing + laser welding at the connection between lamp head and arm, IP68 protection rating, preventing rainwater penetration and short circuits.
- Insulating Materials Application
Lamp Body Material: V0-grade flame-retardant PC + fiberglass composite, withstand voltage ≥5kV, impact resistance IK10.
Cable Protection: Silicone rubber insulated cables, temperature range -60°C to +200°C, anti-aging lifespan ≥20 years.
- Automatic Leakage Cutoff Technology
Residual Current Protector (RCD): Action time ≤0.1 seconds, automatically cuts power when leakage current ≥30mA.
Insulation Monitoring Module: Real-time detection of lamp body grounding insulation resistance, triggers alarm and cuts power when resistance ≤1MΩ.
- Safety Verification and Testing
Withstand Voltage Test: Passed 5kV/1-minute power frequency withstand voltage test, no breakdown or flashover.
Wet Heat Cycle Test: Passed IEC 60068-2-30 standard (55°C/95%RH, 12 cycles), no degradation in insulation performance.
Salt Spray Corrosion Test: Passed ISO 9227 standard (5% NaCl solution, 1000 hours), fasteners without corrosion, stable electrical performance.

Product Advantages
- Integrated Monitoring
- Electric Shock Prevention Safety
- Monocrystalline Silicon Photovoltaic System
- Multi-Scenario Adaptation
- Optics and Energy Saving
About Us
|
Address: |
Guoji Industrial Park, Songqiao Town, Gaoyou City, Jiangsu Province, China ; |
|
Tel/WhatsApp: |
+86 18118266199; |
|
Mail: |
hjy@jcledzm.cn |
Hot Tags: led lens street light, China led lens street light manufacturers, suppliers, factory, Led Pedestrian Light, pixel led light, ir led, Led Street Light Warm White, led chip, Led Street Light with Day Night Sensor













