Motion Sensor Solar Street Light
video
Motion Sensor Solar Street Light

Motion Sensor Solar Street Light

● High-sensitivity infrared sensor with intelligent control
● High-quality aluminum anti-corrosion lamp pole ensuring structural strength and weather resistance
● Full-link energy-saving and environmental protection technology integrating green energy and efficient energy storage
Send Inquiry
Description

Product Introduction

  • The Motion Sensor Solar Street Light is equipped with high-sensitivity infrared sensors, aluminum anti-corrosion lamp poles, and full-link energy-saving and environmental protection technologies.
  • It features dual-element pyroelectric infrared sensing technology (detection range: 8–12 meters, angle: 110°), 6063-T5 aviation aluminum lamp poles (anodized + fluorocarbon coating, salt spray test ≥1,000 hours), high-efficiency monocrystalline silicon solar panels (conversion rate ≥23%), and a lithium iron phosphate battery energy storage system (cycle life ≥5,000 times).
  • It supports three-level brightness adjustment (0–100% stepless dimming), intelligent rainy-day battery life (3–7 days of continuous power supply), and remote operation and maintenance monitoring. Compared with traditional mains-powered street lights, it saves 100% energy, reduces installation costs by 70%, and extends service life to 80,000 hours, representing an innovative solution integrating green energy and smart lighting.

 

product-632-369

 

High-Sensitivity Infrared Sensor

● Technological Breakthroughs in Infrared Sensing

Dual-element pyroelectric sensor chip: Uses high-performance sensors like LHI778 or RE200B with built-in Fresnel lens arrays. Detection range: 8–12 meters (adjustable), detection angle: 110°, response time ≤0.3 seconds, false trigger rate ≤0.8%.

Multi-target dynamic tracking algorithm: Supports simultaneous recognition of pedestrians, vehicles, and non-motorized vehicles. AI algorithms distinguish target movement trajectories (speed, direction) to avoid false triggers caused by small animals or swaying leaves.

 

● Smart Dimming Strategy

Temperature compensation technology: Built-in NTC thermistor monitors ambient temperature (-40°C~+70°C) in real time, dynamically adjusting sensor sensitivity to prevent detection deviations in extreme temperatures.

Anti-interference design: Uses 5.8GHz microwave filters to shield wireless signal interference (Wi-Fi, Bluetooth), ensuring detection stability.

2

 

Aviation-Grade Aluminum Anti-Corrosion Lamp Pole

  • Material and Process

T5 aviation aluminum: Tensile strength ≥205MPa, yield strength ≥170MPa, elongation ≥8%, 30% stronger than ordinary aluminum alloy.

 

  • Triple Anti-Corrosion Treatment

Anodized layer: Thickness ≥15μm, hardness ≥300HV, salt spray resistance ≥500 hours.

Fluorocarbon coating: Thickness ≥40μm, weather resistance compliant with AAMA 2605 standard, UV resistance ≥15 years.

Electrophoretic primer: Thickness ≥20μm, adhesion Level 0 (cross-cut method), rust resistance improved by 200%.

 

  • Structural Design and Mechanical Performance

Tapered one-piece molding: Lamp pole diameter tapers from 120mm at the bottom to 60mm at the top, wall thickness 3–5mm, wind resistance ≥Typhoon Level 15 (wind speed 51m/s).

Modular splicing design: Supports 3–8 meter segmented splicing, flange connection strength ≥50kN, torsional strength ≥10kN·m.

 

  • Reliability Verification

Salt spray test: Passed ISO 9227 standard (5% NaCl, 1,000 hours) with no corrosion, blistering, or peeling.

Vibration test: Passed IEC 60068-2-6 standard (10–500Hz, 8g, 4 hours) with no deformation and secure connections.

Fatigue test: Passed 100,000-cycle bending test (amplitude ±5°) with no cracks and strength degradation ≤5%.

product-642-439

 

Full-Link Energy-Saving and Environmental Protection Technology

  • Solar Power Supply System

Monocrystalline silicon solar panel: Uses PERC technology, conversion rate ≥23%, size 1956×992×35mm, power 320W, capable of outputting ≥10% rated power under low-light conditions (illuminance 100lux).

MPPT solar controller: Supports maximum power point tracking (MPPT), charging efficiency ≥98%, with overcharge, over-discharge, reverse connection, and short-circuit protection.

 

  • Lithium Iron Phosphate Battery Energy Storage

Battery specifications: Capacity 240Ah, voltage 12.8V, energy density ≥160Wh/kg, cycle life ≥5,000 times (DOD 80%).

BMS battery management system: Monitors voltage, current, temperature, and SOC (state of charge) in real time, supports balanced charging, over-temperature protection, and fault self-diagnosis.

 

  • LED Lighting System

High luminous efficacy LED beads: Uses CREE XP-G3 or Lumileds LUXEON 3030 series, single bead power ≥1W, luminous efficacy ≥190lm/W, color temperature 5000K (neutral white), color rendering index Ra≥75.

Optical lens design: Uses PC material batwing lenses, beam angle 120°×60°, ground illuminance uniformity U0≥0.4, glare index (TI) ≤10.

 

  • Intelligent Energy-Saving Strategy

Time-sharing power control: Automatically adjusts solar panel output power based on light intensity, prioritizing battery energy storage at night to avoid overcharging.

Rainy-day battery life mode: Supports 3–7 days of continuous power supply during rainy days (configured according to battery capacity and load power), with battery life 300% longer than traditional lead-acid batteries.

product-1090-473

 

Product Advantages

  • Infrared Sensor
  • Aluminum Lamp Pole Anti-Corrosion
  • Energy-Saving and Environmental Protection
  • Intelligent Control
  • Rainy-Day Battery Life Mode

 

About Us

Address:

Guoji Industrial Park, Songqiao Town, Gaoyou City, Jiangsu Province, China ;

Tel/WhatsApp:

+86 18118266199;

Mail:

hjy@jcledzm.cn

Hot Tags: motion sensor solar street light, China motion sensor solar street light manufacturers, suppliers, factory, led battery, Led Light Solar Street Light, Led Solar Street Light 500w, Led Lights Road, led remote control, 150w Street Light

Send Inquiry

(0/10)

clearall