3000 Watt Solar Street Light

Product Introduction

◎Advantages of high-power design: The 3000 Watt LED Street Light achieves a luminous efficiency of 180lm/W, with a total luminous flux of 540,000 lumens and a coverage radius of 40 meters. Compared with traditional street lights, it saves 50% energy with strong penetration, and reduces the total cost by 51% over 10 years.

◎Dynamic dimming technology: Realizes five-level brightness adjustment (10%-100%) through microwave radar + light sensor, operating in energy-saving mode during late night when no one is around. A steel plant project using this technology achieves annual electricity savings of 252,720kWh.

Core Value of High-Power Design

Exponential Improvement in Luminous Efficiency and Coverage Range

The 3000 Watt LED Street Light adopts multi-chip integrated packaging technology, equipped with 600 high-power LED chips, with luminous efficiency breaking through 180lm/W and total luminous flux reaching 540,000 lumens.

◎Coverage radius: At an installation height of 25 meters, the effective lighting radius can reach 40 meters (only 25 meters for traditional street lights), and a single lamp can replace 3 traditional street lights;

◎Penetrating lighting: In mining scenarios with high concentrations of dust and fog, its high color rendering (Ra≥80) and low color temperature (4000K) design can penetrate 50 meters of air medium, ensuring that the working surface illuminance is ≥50lx (national standard ≥20lx);

◎Energy consumption comparison: Calculated based on 12 hours of operation per day, a single 3000W LED street light consumes 13,140kWh annually, which is 50% more energy-efficient than a 6000W high-pressure sodium lamp of the same brightness (annual power consumption 26,280kWh), and reduces carbon dioxide emissions by 13.1 tons per year.

Dynamic Dimming and Intelligent Energy-Saving Strategies

The 3000 Watt LED Street Light is equipped with a microwave radar + light sensor dual-mode control system, supporting five-level brightness adjustment:

◎Late night unoccupied state: Brightness drops to 10% (54,000 lumens) to meet basic safety lighting needs;

◎Vehicles/people approaching (50-meter buffer zone): Brightness increases to 30% (162,000 lumens), pre-illuminating in advance to avoid visual blind spots;

◎Vehicles/people staying (20-meter detection zone): Brightness at 100% (540,000 lumens) to ensure clear visibility in all scenarios;

◎Emergency mode: When the grid voltage fluctuates, it automatically switches to 80% brightness (432,000 lumens) to maintain lighting stability;

◎Light pollution control: The upward light ratio is controlled within 5% through intelligent algorithms, reducing light pollution by 70% compared with traditional street lights.

IP65 Protection Rating

Definition of IP Protection Rating and Industry Standards

The IP (Ingress Protection) rating, formulated by the International Electrotechnical Commission (IEC), is used to measure the protection capability of equipment enclosures against solid foreign objects and liquids. Its format is IPXX, where the first digit represents the dust protection level (0-6) and the second digit represents the water protection level (0-9). The 3000 Watt LED Street Light meets the IP65 standard, which means:

◎Dust protection level 6: Completely prevents dust ingress (no dust deposition inside);

◎Water protection level 5: Withstands low-pressure water jet spraying from all directions (30kPa water pressure, 12.5L/min flow rate, lasting 3 minutes).

Core Difference Comparison Between IP65 and IP54

Product Advantages

◎High-power lighting

◎IP65 protection

◎Dust and water resistance

◎Corrosion resistance

◎Dynamic dimming

◎Industrial-grade application

About Us

Hot Tags: 3000 watt solar street light, China 3000 watt solar street light manufacturers, suppliers, factory, glass solar lights, outdoor hanging solar led lights, solar lights outdoor lighting, led shed lights, outdoor grass solar lights, solar street lamp radar induction