600w Solar Street Light
video
600w Solar Street Light

600w Solar Street Light

1.Advanced microcomputer control with multi-sensor fusion and algorithm optimization
2.High-density high-quality LED lamp beads, solving the problems of rapid light decay and short service life of traditional lamp beads
3.Microcomputer control linking LED dynamic dimming and battery protection mechanism
Send Inquiry
Description

Product Introduction

◎Breakthrough in microcomputer control technology: The 600W solar street light realizes dynamic time-sharing dimming, seasonal adaptation and remote fault management through 32-bit ARM processor and multi-sensor fusion. Compared with traditional control, the energy-saving rate is increased by 50%-70%, and the operation and maintenance cost is reduced by more than 40%.

◎Performance innovation of high-density LED lamp beads: Adopting 480 imported chip-on-board chips and ceramic substrate packaging, the luminous efficiency reaches 160lm/W, the illuminance uniformity is 0.82, and the light decay is only 5% under 100,000 hours of service life, completely solving the problems of rapid light decay and short service life of traditional lamp beads.

◎System-level collaborative optimization: The microcomputer control links the LED dynamic dimming and battery protection mechanism, automatically matching the brightness according to the ambient light, avoiding overcharge/overdischarge, increasing the cycle life of lithium batteries to 1200 times, and reducing the full-cycle cost by 35%.

1

 

Advanced Microcomputer Control

Technical Architecture of Microcomputer Control System

The new-generation 600W solar street light is equipped with a 32-bit ARM Cortex-M4 microprocessor, integrating infrared human body sensing, photosensitive sensors, radar speed measurement modules, and GPS positioning chips. Through multi-source data fusion and adaptive algorithms, it achieves dynamic optimization of lighting modes. Its core functions include:

1.Intelligent Time-Sharing Dimming: Automatically Switching Brightness Based on Traffic Density

The system divides the night into three phases: "peak period (18:00-22:00)", "flat period (22:00-24:00)", and "trough period (0:00-6:00)", with support for custom time settings:

◎Peak period: Maintains 100% brightness to ensure road safety;

◎Flat period: Dims to 70% brightness, balancing energy saving and lighting needs;

◎Trough period: Further reduces to 30% brightness, only restoring full brightness within 3 seconds after detecting a moving target.

 

2.Seasonal Adaptive Control: Solving the Problem of Day-Night Length Changes

By obtaining local latitude and longitude information via GPS positioning, the system automatically calculates sunrise/sunset times and dynamically adjusts light control thresholds. For example, it delays lighting time in summer (long days and short nights) and advances it in winter (short days and long nights), eliminating the need for manual intervention.

2

3.Fault Self-Diagnosis and Remote Management: Reducing Maintenance Complexity

The system has a built-in current/voltage monitoring module that can real-time detect battery status, lamp bead operation, and solar panel charging efficiency. In case of faults, alarm information is uploaded to the cloud platform via the LoRa wireless communication module, and maintenance work orders are generated. In addition, it supports remote parameter modification (such as brightness thresholds and sensing distance) without on-site operations.

 

3

 

High-Density High-Quality LED Lamp Beads

High-Density LED Array Design

The new-generation 600W solar street light uses 480 high-color-rendering index (CRI≥80) LED lamp beads, achieving performance breakthroughs through the following technologies:

 

◎Imported Chip: 30% Higher Luminous Efficiency

Using chips from American Cree or German Osram, the luminous efficiency reaches 160lm/W (traditional lamp beads only 120lm/W). With a total power of 600W, it can output 96,000 lumens, 25% brighter than similar products.

 

◎Multi-Cavity Lens Design: Illuminance Uniformity ≥0.8

Each lamp bead is equipped with an independent PMMA (polymethyl methacrylate) lens. Through aspherical optical design, the light refraction angle is controlled within 120°±5°, eliminating the "bright in the middle, dark at the edges" problem of traditional street lights. Test data shows that in main road scenarios with a lamp pole height of 10 meters and a spacing of 35 meters, the road surface illuminance uniformity reaches 0.82, far exceeding the national standard (≥0.4).

4

 

Product Advantages

◎600W solar street light

◎microcomputer control

◎high-density LED lamp beads

◎intelligent dimming

◎ultra-long lifespan

◎outdoor lighting system

 

About Us

Address:

Guoji Industrial Park, Songqiao Town, Gaoyou City, Jiangsu Province, China ;

Tel/WhatsApp:

+86 18118266199;

Mail:

hjy@jcledzm.cn

Hot Tags: 600w solar street light, China 600w solar street light manufacturers, suppliers, factory, best solar lights for gate pillars, Solar Integrated Lamp, outdoor powered lights, Solar Street Lights with Camera, solar uplights, solar flood lights for landscaping

Send Inquiry

(0/10)

clearall