Led Street Light 300w
video
Led Street Light 300w

Led Street Light 300w

1.300W high-density LED array with 1,200 high-power lamp beads
2.Monocrystalline silicon solar panels with 23.5% efficiency
3.MPPT controller enabling three-stage charging and dynamic power adjustment
Send Inquiry
Description

Product Introduction

◎Breakthrough in lamp bead technology: The 300W LED street light uses 1,200 high-power lamp beads, achieving a luminous efficiency of 180lm/W through three-dimensional arrangement and liquid cooling. With a lifespan exceeding 100,000 hours, it saves 40% energy compared to traditional high-pressure sodium lamps and reduces maintenance costs by 80%.

◎Dominance of monocrystalline silicon: The monocrystalline silicon solar panels boast a mass-produced efficiency of 23.5%, significantly outperforming polycrystalline silicon in low-light performance and temperature adaptability. With a degradation of <15% over 25 years and a levelized cost of energy (LCOE) as low as 0.18 yuan/kWh, they are ideal for high-density energy demand scenarios.

◎Intelligent energy management: The MPPT controller enables three-stage charging and dynamic power adjustment, ensuring over 8 hours of operation during rainy days. Paired with a supercapacitor backup power supply, it guarantees stable performance in extreme weather conditions.

◎Extreme environment adaptability: Technologies such as UV-resistant lamp covers, electric heating films, and nano-hydrophobic coatings have been validated in the Qinghai-Tibet Plateau, coastal typhoon belts, and desert regions, extending the lifespan by three times compared to traditional street lights.

1

 

Quantity and Quality of Lamp Beads

1.Technological Breakthroughs in 300W High-Density Lamp Bead Array

Using 1,200 high-power LED chips (0.25W per chip), three-dimensional arrangement and liquid cooling heat dissipation achieve a luminous efficiency of 180lm/W, with three major performance leaps:

◎Luminous efficiency improvement: The overall luminous efficiency of the lamp reaches 180lm/W (industry average is 150lm/W), outputting 54,000 lumens at 300W power, with illuminance uniformity >0.7 (complying with CJJ45-2015 Urban Road Lighting Design Standard);

◎Heat dissipation revolution:Vacuum copper-plated substrate: Thermal conductivity >400W/(m·K), 3 times higher than aluminum substrates;

◎Microchannel liquid cooling technology: Built-in nanofluid circulation pipeline, thermal resistance <0.1℃/W, junction temperature stable below 65℃;

◎Intelligent temperature-controlled fan: Automatically starts when ambient temperature >40℃, noise <35dB (equivalent to library environment).

2

2.Lamp Bead Quality Control System

◎Incoming material inspection:

Spectral analyzer verifies wavelength consistency (±1nm);

High-low temperature impact test (-40℃ to 125℃, 100 cycles).

◎Production monitoring:

AOI automatic optical inspection identifies false solder joints;

Integrating sphere tests luminous flux of each lamp bead (error <3%).

◎Finished product verification:

Salt spray test (5% NaCl solution, no corrosion for 480 hours);

Vibration test (5-500Hz random vibration, no damage for 2 hours).

 

3

 

Monocrystalline Silicon Solar Panels

Analysis of Monocrystalline Silicon Technical Advantages

Adopting 210mm large-size monocrystalline silicon wafers (M12 specification) and PERC+SE technology, achieving four major performance breakthroughs:

◎Conversion efficiency: Laboratory efficiency exceeds 26.2% (mass-produced version reaches 23.5%), 25% higher than polycrystalline silicon;

◎Low-light response: Maintains 18% conversion efficiency under 200lux illuminance (polycrystalline silicon only 12%);

◎Temperature coefficient: Power attenuation rate -0.34%/℃ (polycrystalline silicon is -0.45%/℃), significant advantages in high-temperature environments;

◎Attenuation control: First-year attenuation <2%, 25-year linear attenuation <15% (complying with IEC 61215 standard).

 

Structural innovation

◎Bifacial power generation design: The back uses transparent conductive oxide (TCO) glass, which can absorb ground reflected light, with a comprehensive power generation gain of 8-25%;

◎Intelligent light tracking system: Through a dual-axis tracking bracket (optional), the solar panel is always perpendicular to the sun's rays, increasing daily power generation by 30-40%.

4

Monocrystalline Silicon vs. Polycrystalline Silicon

Parameter

Monocrystalline Silicon

Polycrystalline Silicon

Advantageous Scenarios

Conversion Efficiency

22%-24% (mass production)

17%-19% (mass production)

Areas with scarce land resources (e.g., Japan, Singapore)

Low-Light Performance

Efficiency >18% at 200lux

Efficiency <12% at 200lux

Rainy regions (Northern Europe, Southwest China)

Temperature Adaptability

Stable operation at -40℃ to 85℃

-20℃ to 70℃

Deserts (Middle East) and polar regions (Siberia)

Attenuation Rate

<15% in 25 years

>25% in 25 years

Long-term investment projects (BOT mode)

Power Generation per Unit Area

210W/m²

165W/m²

Roof/facade installation scenarios

Initial Cost

1.2 yuan/W

0.8 yuan/W

Cost-sensitive rural areas

LCOE (Levelized Cost of Electricity)

0.18 yuan/kWh

0.25 yuan/kWh

Photovoltaic poverty alleviation projects

 

Product Advantages

◎300W LED street light

◎Monocrystalline silicon solar panel

◎High-density lamp bead array

◎Smart transportation lighting

◎Photovoltaic-energy storage-charging integration

 

About Us

Address:

Guoji Industrial Park, Songqiao Town, Gaoyou City, Jiangsu Province, China ;

Tel/WhatsApp:

+86 18118266199;

Mail:

hjy@jcledzm.cn

Hot Tags: led street light 300w, China led street light 300w manufacturers, suppliers, factory, All in One Solar Street Light with Camera, flower solar lights for garden, Outdoor Solar Up Lights, Solar Street Light Ip65, solar torch price, wired solar outdoor lights

Send Inquiry

(0/10)

clearall