Home>Products> Solar Lighting > Integrated Solar Street Light

Street Light With Solar Panel And Battery

Street Light With Solar Panel And Battery

1.Full-spectrum LED light source with CRI>85
2.Healthy light environment design
3.Dynamic information release system with ultra-high-definition smart screen
4.Intelligent content management system

Send Inquiry

Description

Product Introduction

◎Breakthrough in color rendering performance: Adopting full-spectrum LED chips with CRI>85 and constant current drive technology, it achieves accurate color reproduction (Ra=95, R9=92), which is 46% higher than traditional street lights (CRI=65), significantly optimizing the visual experience of commercial areas and road lighting.

◎Healthy light environment design: Through dynamic adjustment of color temperature (2200K-6500K), glare control (UGR≤16) and IP66 protection, it adapts to circadian rhythms and extreme environments such as sandstorms and heavy rains, meeting the GB 50034-2013 healthy lighting standards.

◎Ultra-high-definition smart screen configuration: Integrating a P2.5 resolution (1920×1080), 120Hz refresh rate and 160° wide viewing angle LED screen, it supports multi-terminal collaborative control, intelligent split-screen (8 areas) and environmental sensing linkage. Compared with traditional P5 screens, the clarity is improved by 4 times.

Full-Spectrum LED Light Source

◎Optimization of phosphor ratio: Customized proportion of red, green, and blue tricolor phosphors, enabling the spectrum to cover 98% of the visible light band (400-700nm), approaching the color performance of natural light (CRI=100);

◎Constant current drive precision: Adopting linear constant current source + PWM dimming dual-mode drive, with output current fluctuation <1%, avoiding low-frequency flicker (<100Hz) that may damage the retina;

◎Dynamic color temperature adjustment: Supporting stepless adjustment from 2700K to 6500K, automatically matching environmental needs through light sensors (e.g., using 4000K neutral light for road lighting at night, switching to 3000K warm light during commercial area activities).

Healthy Light Environment Design

◎Circadian rhythm adaptation: Through a built-in clock chip, it automatically switches to 2200K amber light (blue light component <5%) from 2-5 a.m., reducing the inhibition of melatonin secretion;

◎Glare control: Using batwing light distribution lenses, the glare index (UGR) is reduced from 28 of traditional products to 16, meeting the requirement of UGR≤19 in "Code for Design of Building Lighting" (GB 50034-2013);

◎IP66 protection upgrade: Adding dust filters and drainage grooves inside the lamp head to ensure CRI>90 even in sandstorms (PM10 concentration >1mg/m³) or heavy rain (rainfall 50mm/h) environments.

Dynamic Information Release System

P2.5 Ultra-HD LED Screen Configuration

Traditional street lamp screens are limited by installation space and power consumption, with resolutions generally lower than P5 (pixel pitch 5mm), resulting in blurriness when viewed from a distance.

◎Micro-pitch packaging technology: Using SMD2121 lamp beads (pixel pitch 2.5mm), achieving 1920×1080 full HD resolution on a 1.2m×0.8m screen, supporting clear reading from 10 meters away;

◎Dynamic refresh rate optimization: Through a hybrid algorithm of line scanning and global driving, the refresh rate is increased from 60Hz to 120Hz, eliminating motion blur in fast-moving images (such as video advertisements);

◎Wide viewing angle design: Adopting a 160° curved light guide plate, the screen's horizontal and vertical viewing angles both reach 160°, increasing the coverage area by 60% compared to traditional flat screens.

Intelligent Content Management System (CMS)

◎Intelligent split-screen display: The screen can be divided into 2-8 independent areas to play different contents simultaneously (e.g., displaying traffic information on the left and commercial advertisements on the right);

◎Environmental sensing linkage: Integrating temperature and humidity sensors, PM2.5 detectors, and noise monitoring modules, it automatically switches to environmental protection public welfare advertisements when air quality exceeds the standard.

Energy-Saving and Reliability Design

◎Dynamic brightness adjustment: Automatically adjusts screen brightness (100-1000cd/m²) according to ambient illuminance (0-100,000lux), saving 55% more energy compared to fixed brightness mode;

◎Heat pipe cooling technology: Embedding 8mm copper pipes + aluminum fin heat dissipation modules on the back of the screen, keeping the working temperature stable below 45℃ (industry average 60℃) and extending the LED lifespan to 100,000 hours;

◎Anti-theft alarm function: When the screen is disassembled, the built-in vibration sensor triggers a high-decibel alarm (110dB) and pushes location information to the management platform.

Comprehensive Performance Comparison of Products

Performance Indicator	Ordinary Solar Street Light	This Product (High Color Rendering + Smart Screen)	Industry Benchmark Value
Color Rendering Index (CRI)	65	95	80
Screen Resolution	P5 (pixel pitch 5mm)	P2.5 (pixel pitch 2.5mm)	P4
Intelligent Split-Screen Function	Not supported	Supports 8-area independent control	Supports 4 areas
Environmental Sensing Linkage	Light control only	Supports temperature, humidity, PM2.5, and noise monitoring	Supports light control + rain control
Comprehensive System Efficiency	72%	88%	80%