Solar Mini High Mast

1.Low power, with a power range of 50-150W, featuring precise light pattern control and intelligent dimming
2.High-pressure sodium lamps: strong penetration, low cost, and resistance to voltage fluctuations
3.Solar energy system design: self-sufficiency and intelligent management

Send Inquiry

Description

Product Introduction

◎Low-power advantages: 50-150W precise lighting reduces light pollution, lowers the cost of solar energy systems, extends the service life of light sources, and is suitable for small and medium-sized scenarios such as parks and remote areas.

◎Sodium lamp performance: High-pressure sodium lamps have strong penetration, low cost, and resistance to voltage fluctuations. They perform better than LEDs in severe weather, balancing service life and economy.

◎Solar energy system: Self-sufficient design eliminates the need for wiring. Intelligent controllers optimize battery life on rainy days, which is both environmentally friendly and reduces long-term operating costs.

Advantages of Low-Power Design

Power Adaptation to Scenario Requirements

◎Avoiding light pollution: Low power combined with a batwing light distribution curve concentrates light on target areas (such as roads and yards), reducing interference to surrounding residential areas and ecological zones.

◎Extending battery life: In solar-powered systems, low power significantly reduces the demand for battery capacity. For example, a 100W light source with a 200Ah battery can support continuous operation for 3 cloudy and rainy days, while a 300W light source requires a battery of 600Ah or more, increasing the cost by 2 times.

◎Improving system reliability: Low-power lamps generate less heat. Combined with natural convection heat dissipation design, the service life of the light source can reach more than 30,000 hours (sodium lamp standard), which is 40% lower than the failure rate of traditional high-power LEDs or high-pressure sodium lamps.

Comparison with High-Power Lighting Solutions

Parameter	Solar Mini High Mast (100W Sodium Lamp)	Traditional High Mast (400W LED/High-Pressure Sodium Lamp)
Applicable scenarios	Park roads, small yards (coverage radius 20-30 meters)	Large squares, main roads (coverage radius over 50 meters)
Solar system cost	Low demand for battery capacity, overall cost optimized by 30%	Requires large-capacity batteries and high-end solar panels, with high cost
Light pollution control	Precise light distribution, spilled light ≤10%	High-power floodlight, spilled light ≥30%
Maintenance cycle	Light source life of 30,000 hours, maintenance once every 3-5 years	High-power light source has a short life, requiring replacement every 2-3 years

Performance Advantages of Sodium Lamps

Technical Characteristics of Sodium Lamps

◎Strong penetration: The yellow light wavelength (589nm) has 15-20% lower penetration loss than LED white light in severe weather such as fog, rain, and snow, ensuring visibility in complex weather conditions.

◎Balance between service life and cost: The service life reaches 30,000 hours, the unit price is only 1/3 of that of LEDs of the same specification, and no complex drive circuit is needed, reducing the overall system cost by 25%.

◎Resistance to voltage fluctuations: When the voltage of the solar system is unstable (such as low battery power), the luminous efficiency fluctuation of sodium lamps is ≤5%, while LEDs may flicker due to the protection of the drive circuit.

Comparative Analysis of Sodium Lamps and LEDs

Parameter	High-Pressure Sodium Lamp (HPS)	LED Light Source
Initial cost	Low (low cost of light source + driver)	High (requires constant current drive and heat dissipation system)
Performance in severe weather	Yellow light has strong penetration, with excellent visibility in rainy and foggy days	White light is easily scattered, requiring higher brightness compensation
Voltage adaptability	Wide voltage range (AC100-277V), strong resistance to fluctuations	Requires voltage-stabilized drive, voltage fluctuations easily cause failures
Maintenance complexity	Light source replacement is simple, no need to adjust light pattern	Professional tools are required to replace modules, and the light pattern needs to be recalibrated

Solar Energy System Design

System Composition and Energy Efficiency Optimization

◎Solar panel: Monocrystalline silicon module with conversion efficiency ≥22%, and adjustable tilt angle to adapt to different latitude areas.

◎Battery: Colloidal battery or lithium battery with a cycle life of ≥2000 times, supporting deep discharge protection.

◎Intelligent controller: Supports both light control and time control modes, and automatically switches to energy-saving mode (such as reducing power to 70%) on cloudy and rainy days.

Adaptability to Extreme Environments

◎High-temperature areas: The solar panel and battery are designed separately to avoid battery attenuation caused by high temperatures, and the system efficiency retention rate is ≥95%.

◎Dusty environment: IP65 protected lamp head and self-cleaning coated solar panel reduce the impact of dust coverage on power generation.

Product Advantages

◎Low-power lighting

◎High-pressure sodium lamp

◎Solar self-power supply

◎Resistance to severe weather

◎IP65 protection

◎Scenario-based solutions