1000 Watt Street Light
video
1000 Watt Street Light

1000 Watt Street Light

1.High-Power Illumination, High-Efficiency Luminous Efficacy, Ultra-Wide Coverage
2.IP65 Protection Rating, High Reliability in Extreme Environments
3.Electric Shock Prevention: Class I & II Double Insulation and SELV Safety Design
4.Intelligent Control: Remote Management and Adaptive Adjustment
Send Inquiry
Description

Product Introduction

  • The 1000 Watt Street Light integrates ultra-high power output, ultra-wide lighting range, IP65 protection rating, and electric shock prevention safety design.
  • Adopting a modular split architecture (light source module, power module, and heat dissipation module are independently replaceable), it achieves precise 1000W power (luminous flux ≥130,000lm), supports installation heights of 20–40 meters, with an irradiation radius of 50–80 meters and a coverage area ≥10,000㎡.
  • Its luminous efficacy ≥130lm/W, IP65 protection rating, electric shock prevention functions (via Class I & II double insulation design and SELV safety extra-low voltage output), and intelligent control balance high-efficiency lighting with safety protection needs.

product-497-67

 

High-Power Illumination

Innovative Light Source Architecture

● High-Power LED Array: Uses 300×3W high-brightness LED chips (brands: CREE or OSRAM), divided into 10 independent drive groups, each supporting 30W–100W dynamic adjustment. Luminous flux ≥130,000lm (initial value), representing a 464% brightness increase and 60% energy consumption reduction compared to traditional high-pressure sodium lamps (250W, 28,000lm luminous flux).

● Optical Lens Design: Equipped with 120°×60° asymmetric batwing lenses (PMMA material), achieving "high brightness along road axes, low glare across short axes." Irradiation radius reaches 50–80 meters (at 30m installation height), covering ≥10,000㎡, suitable for six-lane and wider main roads.

 

Dynamic Dimming and Energy Saving

Built-in photosensitive sensors and microwave radar sensors (Doppler Effect) support three modes: light control, time control, and traffic flow sensing. Nighttime base brightness is maintained at 50% (≈65,000lm), increasing to 100% (130,000lm) when vehicles are detected, achieving 50% energy savings.

2

 

IP65 Protection Rating

Protection Structure Analysis

  • Dustproof (Level 6): Completely prevents dust intrusion with no internal dust accumulation, suitable for sandstorm-prone areas (e.g., northwest industrial parks).
  • Waterproof (Level 5): Withstands low-pressure water jets from any direction (12.5L/min, 30kPa water pressure), simulating heavy rain impact, ensuring no water penetrates internal circuits.

 

Material and Process Innovations

  • Lamp Body Sealing: Uses triple silicone rubber sealing rings (compression rebound rate ≥40%) and laser welding to ensure IP65 protection.
  • Heat Dissipation Module: Features 12 independent heat dissipation fins (6063-T5 aluminum alloy, anodized surface), paired with turbocharged fans (airflow ≥200CFM) for active+passive dual cooling. Junction temperature ≤85℃, 30℃ lower than traditional street lights.
  • Cable Interface: Adopts M40 waterproof connectors with IP68-level waterproofing to eliminate water seepage risks at cable access points.

 

IP65 vs IP54 Comparison

Protection Rating

Dust Resistance

Water Resistance

Application Scenarios

IP65

Full dust-proof (Level 6)

Water jet-proof (Level 5, simulating heavy rain)

Outdoor roads, coastal areas, industrial zones

IP54

Partial dust-proof (Level 5)

Splash-proof (Level 4, simulating rain)

Under eaves, semi-open parking lots

 

Intelligent Control

Intelligent Control Module

NBIoT/4G Communication: Built-in NBIoT/5G modules (supporting China Mobile OneNET and China Telecom CTWing platforms) enable remote parameter configuration, fault alarms, and energy consumption statistics.

Edge Computing Capability: Equipped with an ARM Cortex-M7 processor (300MHz clock speed) for localized algorithms (e.g., traffic flow statistics, light forecasting), reducing cloud dependency.

 

Adaptive Adjustment Functions

Weather Compensation Algorithm: Dynamically adjusts brightness based on ambient light intensity, temperature, and humidity, automatically increasing brightness by 10%–20% in rainy/foggy conditions.

Fault Self-Diagnosis: Monitors LED chips, power modules, and sensor status in real time, automatically switching to backup modules and reporting faults to the cloud.

3

 

Product Advantages

  • High-Power Illumination
  • Ultra-Wide Coverage
  • IP65 Protection
  • Electric Shock Prevention
  • Intelligent Control
  • High-Efficiency Heat Dissipation

 

product-636-394

 

About Us

Address:

Guoji Industrial Park, Songqiao Town, Gaoyou City, Jiangsu Province, China ;

Tel/WhatsApp:

+86 18118266199;

Mail:

hjy@jcledzm.cn

Hot Tags: 1000 watt street light, China 1000 watt street light manufacturers, suppliers, factory, led store, Led Pedestrian Light, Hybrid Street Light, led lens, 800w Solar Street Light, led battery

Send Inquiry

(0/10)

clearall