Product Introduction
◎Infrared induction realizes intelligent energy saving: The 120 Watt Street Light is equipped with a dual-element PIR sensor and an intelligent algorithm. Through the mode of "full brightness when people come, gradual dimming when people leave", it achieves an energy saving rate of 60%-85%, and has an anti-interference design to reduce the false trigger rate.
◎Hybrid cooling breaks through environmental limitations: The product combines graphene heat conduction, heat pipe technology and temperature-controlled fans to form an "active + passive" cooling system, controlling the junction temperature within 70℃, ensuring stable light efficiency and extended service life in high-temperature/high-humidity environments.
◎Scenario-based adaptation covers all regional needs: Optimized design for communities, industrial areas, tropical deserts and other scenarios, taking into account low noise, dust resistance and wide-temperature operation. The measured service life exceeds 100,000 hours, and the comprehensive maintenance cost is reduced by more than 70%.

Infrared Human Body Induction
Technical Core of Infrared Human Body Induction
The 120 Watt Street Light is equipped with a dual-element passive infrared sensor (PIR), which realizes dynamic light control by detecting the 9-10μm infrared radiation emitted by the human body. Its core components include:
◎Fresnel lens: Divides the detection area into multiple concentric rings, amplifies the infrared signal through the principle of refraction, and improves detection sensitivity;
◎Pyroelectric sensor: Converts changes in infrared radiation into electrical signals, generating pulse signals to trigger the switch when the human body moves;
◎Intelligent control chip: Analyzes signal intensity and duration, filters out interference such as shaking leaves and small animals, and ensures accurate induction.

Induction Modes and Energy Saving Efficiency
The product provides three working modes, which can be flexibly switched according to scenario needs:
|
Mode |
Trigger Condition |
Brightness Adjustment |
Energy Saving Rate |
|
Full-bright mode |
Continuous detection of human movement |
Maintain 120W full power operation |
0% |
|
Induction mode |
Triggered after detecting human movement |
Reduce to 30W (25% brightness) if no one passes within 30 seconds |
60%-75% |
|
Timing + induction mode |
Combined with light control and human body induction |
Automatically activate induction mode after sunset, turn off before sunrise |
70%-85% |
Anti-Interference Design and Environmental Adaptability
◎Temperature compensation algorithm: Built-in NTC temperature sensor, dynamically corrects sensor sensitivity to avoid false triggers caused by high or low temperatures;
◎Multi-level signal filtering: Eliminates signals from shaking leaves when wind speed >5m/s and interference from moving small animals with radius <0.5m through digital filters;
◎Wide-angle + long-distance detection: The Fresnel lens achieves a 120° horizontal detection angle and a 10m effective detection distance, covering a single lane and part of the sidewalk area.
Adaptive Cooling System
Cooling Technology Architecture of 120 Watt Street Light
The product realizes dynamic junction temperature control through an "active + passive" hybrid cooling system
(1) Passive cooling
◎Vacuum-coated graphene heat conduction plate: Thermal conductivity reaches 1500W/m·K, 3 times higher than traditional aluminum substrates, quickly conducting heat from LED chips to cooling fins;
◎Bionic tree-shaped fins: Imitating the fractal structure of trees, increasing the heat dissipation area by 30% while accelerating air flow through the eddy current effect, improving natural convection cooling efficiency by 25%;
◎Nano hydrophobic coating: The surface of the fins is sprayed with SiO₂ nano coating, with a waterproof rating of IPX6, avoiding dust and water vapor adhesion affecting heat conduction.
(2) Active cooling
◎Micro DC fan: Automatically starts when the junction temperature ≥65℃, forcing convection cooling at 3000rpm, which can reduce the junction temperature by 15-20℃;
◎Gravity heat pipe: Filled with acetone working fluid, quickly transferring heat from the LED module to the root of the fins through phase change heat transfer, with heat conduction efficiency reaching more than 5000W/m·K;
◎PID temperature control algorithm: Real-time monitoring of junction temperature and dynamically adjusting fan speed to avoid increased energy consumption and noise pollution caused by frequent start-stop.

Comparison and Analysis of Cooling Performance
|
Cooling Method |
Junction Temperature Control Range |
Environmental Adaptability |
Energy Consumption Ratio |
Typical Application Scenarios |
|
Traditional aluminum fins |
75-90℃ |
Open environment (wind speed ≥2m/s) |
0% |
Main roads in low-temperature areas |
|
120 Watt hybrid cooling |
55-70℃ |
All environments (-40℃ to 65℃) |
Fan power consumption ≤3W |
High-temperature, high-humidity, closed scenarios |
Product Advantages
◎Infrared human body induction
◎Intelligent energy-saving street light
◎Adaptive cooling system
◎Graphene heat conduction
◎Dynamic dimming street light
About Us
|
Address: |
Guoji Industrial Park, Songqiao Town, Gaoyou City, Jiangsu Province, China ; |
|
Tel/WhatsApp: |
+86 18118266199; |
|
Mail: |
hjy@jcledzm.cn |
Hot Tags: 120 watt street light, China 120 watt street light manufacturers, suppliers, factory, led night light, Solar Led Lights for Street Light, Led Lens Street Light, led pod lights, Led Road Lamp, Solar Led Parking Lights













