Product Introduction
◎Pole anti-corrosion technology: The 60W LED solar street lamp adopts Q355 low-alloy steel as the base material, combined with hot-dip galvanizing (≥85μm) and outdoor plastic powder spraying (80-120μm) double-layer protection, forming a composite anti-corrosion system of metallurgical bonding + passive barrier. It can achieve 15-20 years of durability in C5-level heavy corrosion environments, with cost and performance superior to cold galvanizing, electrophoretic coating and stainless steel solutions.
◎Modular installation design: Through the pre-assembled structure of segmented pole insertion, integrated lamp head and quick-install solar bracket, on-site welding and assembly processes are reduced. Cooperated with conical interfaces and high-strength bolt fixing, it realizes rapid deployment of 2 people per set in 1.5 hours, with verticality deviation ≤3‰.
◎Advantages of cable-free construction: No need for cable laying, only requiring foundation pouring, flange fixing and IP65 waterproof connector connection. Tool costs are reduced by 70%, ordinary workers can complete installation after short-term training, and the comprehensive cost is 40% lower than traditional municipal electric street lamps.
Scenario adaptability

Pole Material Anti-Corrosion Technology
(1) Base Material Selection
High-quality 60W LED solar street lamp poles adopt Q355 low-alloy high-strength structural steel as the base material, with carbon content controlled between 0.18%-0.22%, and alloying elements such as manganese (Mn) and silicon (Si) added.
Compared with traditional Q235 carbon steel, the yield strength of Q355 steel is increased by 20%-30%, and the tensile strength reaches 470-630MPa, which can resist external impacts such as level 8 winds and vehicle collisions.
Its alloy composition forms a dense oxide film, which can effectively block the erosion of chloride ions (Cl⁻) and sulfate ions (SO42-) in humid environments, providing a stable base for subsequent anti-corrosion processes.

(2) Hot-Dip Galvanizing Process
The core process of pole anti-corrosion is hot-dip galvanizing, whose flow includes: pickling derusting → water washing → flux treatment → drying → zinc dipping (450-470℃) → cooling. This process makes the zinc liquid and the steel surface undergo a metallurgical reaction, forming a zinc-iron alloy layer and pure zinc layer with a thickness of ≥85μm.
(3) Outdoor Plastic Powder Spraying
◎Weather resistance: Adding ultraviolet absorber (UV-531) and light stabilizer (HALS 770), it can resist more than 3000 hours of ultraviolet accelerated aging test, with color difference ΔE ≤3;
◎Chemical resistance: No blistering or peeling in pH 5-9 acid-base environment, and can resist corrosion from industrial waste gas and automobile exhaust;
◎Adhesion: Through GB/T 9286-2015 cross-cut test, the adhesion grade reaches 0 (the cutting edge is completely smooth, no peeling).
(4) Comparative Analysis: Performance Differences of Different Anti-Corrosion Processes
|
Anti-Corrosion Process |
Coating Thickness (μm) |
Salt Spray Resistance Life (Years) |
Cost Proportion |
Applicable Scenarios |
|
Cold galvanizing |
5-10 |
3-5 |
15% |
Temporary lighting in dry inland areas |
|
Electrophoretic coating |
20-30 |
8-10 |
25% |
Lightly corrosive industrial parks |
|
Hot-dip galvanizing + powder spraying |
85+80 |
15-20 |
40% |
Permanent lighting in coastal/high humidity areas |
|
Stainless steel 304 |
- |
20+ |
60% |
Extreme corrosion environments (chemical plants) |
Installation Convenience Design
(1) Modular Component Design: Reducing On-Site Workload
◎Segmented pole structure: The pole is divided into 2-3 sections, each interface is fixed by conical insertion + M16 high-strength bolts, with hole alignment accuracy error ≤0.5mm, ensuring verticality deviation ≤3‰;
◎Integrated lamp head: LED light source, driver power supply and sensor are integrated into the lamp head, which can be fixed to the lamp arm with only 4 M8 bolts;
◎Quick-install solar panel bracket: The bracket is connected to the pole through U-bolts + anti-slip gaskets, with an angle adjustment range of 0°-60°, adapting to light conditions in different latitude areas.
(2) Cable-Free Design
◎Foundation construction: Excavate a 0.8m×0.8m×1.0m foundation pit, pour C25 concrete and pre-embed anchor bolts;
◎Pole fixing: Fix the flange at the bottom of the pole with anchor bolts and nuts, with torque value controlled at 180-200N·m;
◎Battery compartment connection: Connect the lithium battery pack and the lamp head with IP65 waterproof connectors, with contact resistance ≤0.5mΩ to avoid false connection risks.

Product Advantages
◎Hot-dip galvanizing anti-corrosion
◎Modular installation
◎Low-alloy steel pole
◎Outdoor plastic powder spraying
◎Cable-free design
◎Intelligent lighting system
About Us
|
Address: |
Guoji Industrial Park, Songqiao Town, Gaoyou City, Jiangsu Province, China ; |
|
Tel/WhatsApp: |
+86 18118266199; |
|
Mail: |
hjy@jcledzm.cn |
Hot Tags: led solar street lamp 60w, China led solar street lamp 60w manufacturers, suppliers, factory, led pod lights, 4000k led, Led Flood Street Light, led lighting, Small Street Lights, pixel led light













