Product Introduction
◎Low power consumption for energy saving: The 20W All In One Solar Street Light achieves precise matching of energy consumption and illuminance in low-traffic scenarios through high-efficiency LED light sources, intelligent light control systems and low-power electronic components, reducing the total life cycle cost by 45% compared with traditional high-power products.
◎Multi-height installation adaptation: Adopting telescopic lamp poles, high-altitude installation kits and customized optical lenses, it supports flexible adjustment of 3-8 meters in height, covering the needs of differentiated scenarios such as community walkways, rural roads and park landscapes, and improving installation efficiency by 50%.
◎IP65 protection rating: Through silicone sealing rings, ultrasonic welding and waterproof joint design, it achieves complete dustproof and low-pressure water jet protection. The failure rate is 80% lower than that of IP54 products, and it is suitable for harsh environments such as coastal high humidity and industrial pollution.

Technical Parameters
|
Name |
JCYH-P-1(20W) |
|
Solar panel |
20W |
|
Battery capacity |
20A |
|
Maximum luminous flux |
2000lm |
|
Chip number |
30D |
|
Material |
Aluminum alloy |
|
Interface |
60mm |
|
Install Height |
3--5M |
|
Install Distance |
10-20M |
|
Product Size |
260*460*50mm |
|
Net Weight |
3.8KG |
|
Packaging Size |
300*500*100mm |
|
Gross Weight |
4kg |
|
Packaging Method |
2 SETS/BOX |
|
Packaging weight |
7.8kg |
Low Power Consumption for Energy Saving
Energy-Saving Requirements
Traditional solar street lights are generally designed with a power of 40W or more to meet the lighting needs of main roads. However, in branch roads or rural roads with low traffic volume and sparse pedestrians, the 20W All In One Solar Street Light focuses on low-traffic scenarios. Through power optimization and intelligent control, it achieves precise matching of energy consumption and illuminance, providing an economical and efficient lighting solution for community walkways, rural paths, park trails, etc.
Technical Path
(1) High-Efficiency LED Light Source: High Brightness Output at Low Power
◎It adopts 2835-type LED chips (single chip power 0.2W), and realizes a total power of 20W through the matrix arrangement of 100 chips, with a luminous efficiency of 180lm/W (industry average 150lm/W).
◎The color rendering index (Ra) is ≥80, and the color temperature is 4000K (neutral white light), which ensures clear visibility of the road surface while reducing power consumption, avoiding visual fatigue caused by low color temperature (3000K) and light pollution from high color temperature (6000K).

(2) Intelligent Light Control System: On-Demand Power Distribution
◎Photosensitive resistor automatic dimming: Steplessly adjusts brightness according to ambient light intensity (0-1000lux), automatically turns on to 100% brightness (20W) at dusk, drops to 30% brightness (6W) after midnight, and turns off before dawn.
◎Human body induction enhancement mode: Built-in microwave radar sensor (detection distance 8 meters, angle 120°), when a pedestrian or vehicle is detected, the brightness is increased to 100% within 3 seconds, and returns to low brightness after a 30-second delay.
◎Energy-saving effect test: Under the conditions of an average daily illumination of 6 hours and 3 consecutive rainy days, the intelligent mode saves 72% more energy than the constant light mode, and the battery life is extended from 1.5 days to 5.5 days.
(3) Low-Power Electronic Components: Maximizing System Energy Efficiency
◎The driving power supply adopts a constant current isolation design with a conversion efficiency of ≥92% (industry average 85%), reducing power loss;
◎The controller integrates MPPT solar charging algorithm to track the maximum power point in real time, which is 20%-30% more efficient than traditional PWM charging, ensuring that the battery can still be charged efficiently under low light conditions (such as cloudy days).

Suitable for Installation at Various Heights
(1) Telescopic Lamp Pole: One-Key Adjustment of Installation Height
The lamp pole adopts three-section aluminum alloy pipes (diameters 60/76/89mm), which can be quickly stretched through built-in spring buckles. The height can be steplessly adjusted within the range of 3-6 meters without cutting or welding, improving installation efficiency by 50%.
The bottom flange is designed with 8 M12 fixing holes, adapting to different foundation sizes (200×200mm to 400×400mm), and meeting various installation methods such as cement piers and expansion bolts.
(2) High-Altitude Installation Kit: Stability Guarantee for 7-14 Meters Scenarios
For high-altitude installation needs, thickened steel casings (wall thickness 3mm) and windproof cable assemblies are provided:
◎The casing is inserted into the bottom of the lamp pole with a depth of ≥1.2 meters, fixed by 4 sets of M16 anchor bolts, and the wind resistance level reaches 12 (wind speed 32.7m/s);
◎The cable is made of 304 stainless steel (diameter 6mm), forming a triangular stable structure with the top of the lamp pole and the ground anchor point, reducing the impact of high-altitude vibration on the service life of the lamp.

Product Advantages
◎Low-power energy saving
◎Modular height installation
◎Micro-channel radiator
◎Graphene vapor chamber
◎IP65 protection
◎Intelligent light control
About Us
|
Address: |
Guoji Industrial Park, Songqiao Town, Gaoyou City, Jiangsu Province, China ; |
|
Tel/WhatsApp: |
+86 18118266199; |
|
Mail: |
hjy@jcledzm.cn |
Hot Tags: 20w all in one solar street light, China 20w all in one solar street light manufacturers, suppliers, factory, solar powered outdoor lights, Bright Outdoor Lights Solar, best outdoor landscape solar lights, sun lights, best solar led patio lights, external solar lights













