100 Watt Led Solar Street Light

Product Introduction

◎Core functions of intelligent LED information screen: The 100-watt solar street light integrates a P2.5 full-color screen, supporting dynamic text, pictures, videos, and real-time data display. The brightness adapts to ambient light, and remote management and intelligent content switching are realized through the "cloud-edge-terminal" architecture.

◎Advantages of information release system: The system supports multi-scenario applications such as municipal publicity, commercial advertising, and emergency early warning. It optimizes content push in combination with traffic flow/pedestrian flow sensors, increasing the click-through rate by 15%-20% compared with traditional advertisements, and the emergency response speed reaches full-city coverage within 30 seconds.

◎Dual-mode power supply and energy-saving design: Adopting solar priority + municipal power supplement mode, combined with partitioned dynamic refresh and content-adaptive dimming technology, the comprehensive energy saving is over 55%, and the battery life reaches 3 days in cloudy and rainy days.

◎Details of IP65 structural protection: Through integrated die-casting shell, double sealing, breather valve technology, and three-proof circuit processing, it achieves 1000-hour salt spray test without corrosion, lightning surge protection, and wide-temperature operation from -40℃ to +85℃.

Intelligent LED Information Screen

Core parameters and display technology of the screen

The new generation 100-watt solar street light integrates a P2.5 full-color LED display (pixel pitch 2.5mm) with a resolution of 128×64 pixels, supporting diversified display of dynamic text, pictures, videos, and real-time data (such as temperature, humidity, PM2.5).

◎High brightness and contrast: The peak brightness of the screen is ≥2000 cd/m², and the contrast is 5000:1, maintaining clear visibility even under direct strong light (100,000 lux). At night, it automatically switches to low-brightness mode (≤300 cd/m²) to avoid light pollution.

Wide viewing angle and uniformity: Using SMD surface mount technology, the horizontal/vertical viewing angles both reach 160°, and the brightness uniformity is ≥95%, ensuring that information is covered without dead angles within 50 meters on both sides of the road.

◎Intelligent dimming algorithm: A built-in photosensitive sensor monitors ambient illuminance in real time, and dynamically adjusts the screen brightness in combination with the time dimension (such as sunrise and sunset times), saving more than 40% energy compared with the fixed brightness mode.

Information release and management system

◎Cloud platform: Provides functions such as device management, content editing, strategy issuance, and data analysis, supporting multi-user permission classification (for example, municipal departments can release public welfare advertisements, and merchants can place commercial information).

◎Edge computing module: Built-in 4-core ARM processor (main frequency 1.5GHz) and 4GB storage space, which can store 1000+ information materials, realizing timed loop playback in offline state.

◎Terminal control unit: Links with the street light body through RS485/4G/LoRa communication interfaces, supporting intelligent switching of display content according to traffic flow (detected by geomagnetic sensors) or pedestrian flow (detected by microwave radar) (such as giving priority to playing traffic prompts during peak hours).

Energy consumption optimization and power supply design

◎Dual-mode power supply strategy

Solar priority mode: The photovoltaic panel (power ≥150W) supplies power to the screen during the day, and the excess power is stored in the lithium battery (capacity ≥100Ah), which can support the screen to work continuously for 3 days (8 hours a day).

Municipal power supplement mode: In continuous rainy weather (≥5 days), it automatically switches to municipal power supply, and the intelligent charging controller (MPPT efficiency ≥98%) gives priority to charging the battery to avoid damage to the service life due to deep discharge.

IP65 Protection Rating

IP65 Protection Design Details

Structural protection:

◎Integrated die-casting shell: Made of A356 aluminum alloy (thickness ≥3mm) with three-layer anti-corrosion coating (primer + anti-rust paint + topcoat) on the surface, passing 1000-hour salt spray test without corrosion.

◎Double sealing design: A silicone sealing ring (Shore hardness 60±5) is used between the screen and the shell, and the gap is filled with thermal conductive adhesive, achieving IPX7 waterproof rating (temporarily immersed in 1-meter deep water for 30 minutes).

◎Breather valve technology: A GORE-TEX breathable membrane (pore size 0.2-1μm) is installed on the top of the shell to balance the internal and external air pressure difference and prevent condensation (measured humidity change ≤5%RH/day).

Electrical protection:

◎Three-proof treatment: The circuit board is coated with three-proof paint (thickness 50-80μm), passing the dripping, spraying, and high-pressure water gun tests in IEC 60529 standard.

◎Overvoltage protection: The input end integrates a TVS diode (breakdown voltage 36V), which can withstand 10kV lightning surge, reducing the failure rate by 90% compared with unprotected circuits.

◎Wide-temperature operation: Uses automotive-grade components (operating temperature -40℃ to +85℃), operating stably in extreme environments such as Harbin (-35℃) and Turpan (+70℃).

Comparison between IP65 and IP54 Protection Ratings

Product Advantages

◎Intelligent LED information screen

◎IP65 protection

◎Dual-mode power supply

◎Salt spray test

◎Smart city

◎Tourist information release

◎Commercial advertising

About Us

Hot Tags: 100 watt led solar street light, China 100 watt led solar street light manufacturers, suppliers, factory, 80 Watt Solar Street Light, Led Ip66 Street Light, Led Lens Street Light, led lighting, Led Pedestrian Light, Solar Led Parking Lights